Samsung Firmware

Samsung Galaxy Mega 2 SM-G7508Q Firmware Flash File Download

Advertisement

Samsung Galaxy Mega 2 SM-G7508Q Firmware Flash File Download

Samsung Galaxy Mega 2 SM-G7508Q Firmware Flash File

The official update Samsung Galaxy Mega 2 SM-G7508Q Firmware 4.4.4 for the Samsung Galaxy Mega 2 SM-G7508Q Firmware Flash File is available for download through the official download links provided below.

Samsung Galaxy Mega 2 SM-G7508Q Firmware Flash File

Samsung Galaxy Mega 2 G7508Q Review

The Samsung Galaxy Mega 2 LTE SM-G7508Q houses a quad core Samsung Exynos 4 Quad 4415 machine on a chip. Its CPU runs at 1.five GHz, that is a chunk higher than average for a telephone’s CPU.
With 1.5 GB of RAM, the Galaxy Mega 2 LTE has a great deal greater memory than other phones launched in 2014.
the bottom version of the Galaxy Mega 2 LTE has 16GB of internal garage, which is a modest quantity whilst compared to other smartphones launched in 2014. fortunately, there are other storage size alternatives, or you could affordably increase its storage with the aid of as a whole lot as 64GB with a microSD card.

Firmware Details

  • Device Samsung Galaxy Mega 2 SM-G7508Q
  • Models: SM-G7508Q
  • Firmware: G7508Q
  • Region: USA
  • Status: Official
  • Type: Full
  • File Name:Zip

How to Install/Update Official Firmware on Samsung Galaxy Mega 2 SM-G7508Q via Samsung Kies:

  1. Turn on Internet connection on your device (should have stable Internet connection)
  2. Download and Install Samsung Kies Utility on your PC
  3. Connect your device to PC through USB
  4. Open/Run Samsung Kies, it should automatically detect your device
  5. At the Samsung Kies home screen, you’ll see New Firmware Upgrade is available notification (If it show- “This is the last firmware”, then your device haven’t received the latest firmware on Kies, check back later or try flashing manually through Odin)
  6. Click on the Firmware Upgrade button to start the update process
  7. Follow onscreen instructions
  8. Once done, your device will be reboot automatically
  9. After reboot, you can disconnect your device from PC
  • If both the above official way don’t work for you, then download firmware from the below list and follow the manual installation guide as it is.

How to Update Samsung Galaxy Mega 2 SM-G7508Q manually

Advertisement
  1. First, enable USB debugging from the establishment.
  2. Download official for the Samsung Galaxy Mega 2 SM-G7508Q top and unzip it.
  3.  Download the latest version of Odin from above and unzip the zip file.
  4.  Run the file on your PC Odin3 v3.07 .exe.
  5. Now boot your Galaxy Mega 2 LTE USA SM-G7508Q download mode by press and holding the (Power + Home + Vol Down) buttons.
  6. Once you enter download mode, is an ID: COM port turned blue and message added in Odin3 v3.07 .exe message box means that the device has been recognized by Odin.
  7. If ID: COM does not appear, the driver is not installed correctly or try different USB cable.
  8. Now locate and add the firmware file ‘tar’ (downloaded from above) to the tab / AP PDA in Odin.
  9. Ensure that only these two options “Auto Reboot” and “Time F.Reset” is tick. (Make sure you re-partition is not marked)
  10.  Now click the “Start” button and start flashing the file. Waiting until ‘Pass’ appears in green on the Odin screen.
  11.  Done.

How to Install/Update Official Firmware on Samsung Galaxy Mega 2 SM-G7508Q With OTA (Over the Air)

  1. Turn on Internet connection on your device (should have stable Internet connection)
  2. Go to Settings>>About, and tap on the Update Option from there (If its show “The latest update have already been installed” message, then your device haven’t receive any OTA yet, check back later or try installing through Kies.
  3. Tap OK to start the download and installation process
  4. Once done, your device will reboot automatically

Firmware Download

Advertisement

Download Samsung Galaxy Mega 2 SM-G7508Q Flash File

DOWNLOAD LINK
DOWNLOAD HERE
  • Note: Make sure the battery is fully charged before Flash is installed. Choose the firmware carefully and the wrong firmware can damage your cell phone.

About the author

Ishfaq

Leave a Comment