Samsung Firmware

Samsung Galaxy S3 Neo Plus GT-I9301i Firmware Flash File Download

Advertisement

Samsung Galaxy S3 Neo Plus GT-I9301i Firmware Flash File Download

Samsung Galaxy S3 Neo Plus GT-I9301i Firmware Flash File

  • The official update Samsung Galaxy S3 Neo Plus GT-I9301i Firmware 4.4.2 for the Samsung Galaxy S3 Neo Plus GT-I9301i Firmware Flash File through the official download links provided below.

Samsung Galaxy S3 Neo Plus GT-I9301i Firmware Flash File

Firmware Details

  • Device Samsung Galaxy S3 Neo Plus GT-I9301i
  • Models: GT-I9301i
  • Android: V4.4.2
  • Firmware: I9301i
  • Region: USA
  • Status: Official
  • Type: Full
  • File Name:Zip 1.11 GB
Advertisement

How to Update Samsung Galaxy S3 Neo Plus GT-I9301i manually

Advertisement
  1. First, enable USB debugging from the establishment.
  2. Download official Android 4.4.2 for the Samsung Galaxy S3 Neo Plus top and unzip it.
  3.  Download the latest version of Odin from above and unzip the zip file.
  4.  Run the file on your PC Odin3 v3.07 .exe.
  5. Now boot your Galaxy S3 Neo Plus GT-I9301i  download mode by press and holding the (Power + Home + Vol Down) buttons.
  6. Once you enter download mode, is an ID: COM port turned blue and message added in Odin3 v3.07 .exe message box means that the device has been recognized by Odin.
  7. If ID: COM does not appear, the driver is not installed correctly or try different USB cable.
  8. Now locate and add the firmware file ‘tar’ (downloaded from above) to the tab / AP PDA in Odin.
  9. Ensure that only these two options “Auto Reboot” and “Time F.Reset” is tick. (Make sure you re-partition is not marked)
  10.  Now click the “Start” button and start flashing the file. Waiting until ‘Pass’ appears in green on the Odin screen.
  11.  Done.

DOWNLOAD LINK

About the author

Ishfaq

Leave a Comment