Mobile Softweres






Guide flash Motorola Android phone.

When the above step is performed.
Now, connect the Motorola Maxx Droid 2 (Verizon) device to your personal computer.
Make sure the computer can detect your phone in fastboot mode.
If you have any problems, you can try to connect the phone to another computer, sometimes has a different method for any different version of the Windows operating system.
Motorola booting device for fastboot mode?
Off the phone, hold and press the power button for a few seconds, the device will shut down completely.
Now, press and hold down both volume + volume up button.


While simultaneously pressing the volume buttons, press and hold the power button for seconds.
Release all fastboot button when you see on the screen.



Then connect the USB cable to your computer, you should see your computer to detect and install a driver.
Now it came to device manager on your computer, you should see a single interface Mot ADB under ADB Interface.

If not listed individually Mot ADB Interface, you can force drivers to search the “C: \ Program Files \ Common Files \ Motorola Shared \ Mobile Drivers \ Drivers” folder directory.
Once every driver, now open RSD Lite and the name has been loaded into internal key should appear in one of the ports, which says Fastboot VANQUISH_U S.

Now connect the Motorola Maxx Droid 2 (Verizon) device to the computer using a USB cable.

Now, click the button with the red circle no. 1 point to search the firmware file .zip and select it.
Finally, click the Start button (red circle with no. 2 marks) to start installing the firmware.
Just wait the firmware installation process until the end, it may take a few minutes.
Once installation is complete, you must restart the Motorola Droid Maxx 2 (Verizon).


About the author


Leave a Comment